| |
Open/Closed
Sign
User Guide
-
Remove
letters from letter fonts. Best method: USE SINGLE
EDGE RAZOR BLADE supplied with this kit. (Letters can also
be twisted off by hand).
-
Attach
the OPEN/CLOSE sign panel to master frame by inserting screws
through rear of sign master until they protrude through the
front of sign Then, attach the four suction cups loosely to
front of sign panel by inserting the protruding ends of the
screws into the suction cup holes. Screw in firmly after starting
all four suction cups.
-
To
attach sign panel to window, first be sure that the window and
suction cups are clean and free of dust and dirt, then just
press the four suction cups firmly on to window.
-
Slide
reader board panel one direction to reveal OPEN sign. Slide
reader board panel the other direction to reveal the CLOSED
sign.
-
Please
note that the last line of letters on the letter fonts contain
foreign currency symbols for use in the countries of Western
Europe.
-
To
remove, lift edges of suction cups with fingernail and peel
of window. DO NOT RIP OR PULL SIGN OFF WINDOW as this
may damage the sign face and/or the holes in the suction cups.
|
|
 |
