Frame-It™ User Guide

Multi-panel Displays

  1. cut DISPLAY Connectors and EDGE Connectors to height of frames
  2. cut 1 connector per vertical joint in half
  3. start bottom row of display alternating half height connectors and frames.
  4. start middle rows alternating full height connectors and frames.
  5. start top row alternating half height connectors and frames.
  6. build display row by row
NOTE: DISPLAY Connectors are used between frames and EDGE Connectors are used on outside edge when making backwalls.

Portable Displays

  1. for frames up to 36" high use 2 FLIP/FLOP hinges spaced 2-3" from corners of frame
  2. for frames over 40" high use 3 FLIP/FLOP hinges; 2 hinges spaced 2-3" from corners and one hinge in the center
  3. frames fold flat for transport and unfold for display
  4. NOTE: maximum distance between hinges should be no more than 24"

Multi-sided Displays

  1. cut MULTI-SIDED Connectors to height of frames
  2. cut 1 connector per vertical joint in half
  3. start bottom level of display alternating half height connectors and frames
  4. start middle levels alternating full height connectors and frames
  5. start top level alternating half height connectors and frames
  6. build pylon level by level

NOTE: MULTI-SIDED Connectors slide between frames to make free standing pylons, A-Frames and hanging displays

Please feel free to contact us with any questions or comments

 

 
 
 
 
 
 
 
 
 
 
 

____________________________________________________________________________________________________________________________________

SWINGER SIDEWALK SIGNS • SPRINGER SIDEWALK SIGNS • SWINGER CAR TOP SIGNS • ECONOCLING SIGN KITS

FRAME-IT DISPLAY SYSTEM • OPEN/CLOSED SIGN KITS • MAGIC CLING STATIC CLING VINYL • 1-RAIL SIGN KITS

CA-ROLL-SEL ROLL HOLDER • GRIP-IT DISPLAY SYSTEM • WO/WO SIGNS • SUPER SUCKER • USB • NEW PRODUCTS

HOME • PRICING • INSTRUCTIONS • FAQS • CONTACT US