- Window
and sign must be clean and free of dust and dirt. The use
of ammonia based glass cleaner (Windex, etc.) is suggested.
Do not use soap and water; a soap film will prevent proper
adhesion of the signs.
- Peel
letter off white backing sheet.
- Place
the self-aligning letters and numbers on the window. Using
the plastic applicator, Squeegee the entire surface of the
letters to the glass so that the entire letter, especially
edges and corners, is pressed flat against the glass surface.
- To
set letters in a straight line, set the first letter in
a horizontal position. The following letters will then automatically
fall in line as they butt up against each other. For variety
and interest, vary the signs. Place letters on a diagonal,
in an arc, or in other interesting arrangements.
- Lift
letters off to remove. Use over and over again as needed.
- When
not in use, place letters on the backing sheet and store
in Ziplock bag.
- Before
using again, be sure that the letters are clean and free
of dust and dirt.
Helpful
Hints:
- Keep
your message simple and avoid excessive copy for easy reading.
- Change
sign message and/or position frequently to increase attention.
- Increase
visibility by placing words in arcs or diagonals.
Please
contact us if you have any questions
|
